Joined in 2023 
82 
63 About this deal
The ATX specification states that 5VSB standby supply efficiency should be as high as possible, recommending 50 percent or higher with 100mA of load, 60 percent or higher with 250mA of load, and 70 percent or higher with 1A or more of load. Yeah, I believe you are confusing the RMx and RMi with the older, mostly discontinued RM line. And of the old RM line only the 750w and 850w versions that were first made by Chicony Power Technology had the bad reputation. Anyone bashing the RMx and RMi doesn't know what they are talking about. Once misinformation gets out there it's hard to get it corrected though. refillable said:Wait, saw this review earlier but I realized that it has Su'scon caps. Su'scon is the "avoid" tier in your own capacitor tier list. Red flag? Makes me think that this series is even more useless than I previously thought especially that the RM650X can be bought for so cheap these days.
Seraph (Laptop 2) CPU: i7 6700HQ GPU: GTX 970M 3GB RAM: 2x8GB DDR4 Storage: 256GB Samsung 951 + 1TB Toshiba HDD Model: Asus GL502VTsaid:for all the good listed in this article, this series of psu just gets bashed in the fourms, just interesting. OVP (Over Voltage) | UVP (Under Voltage) | SCP (Short Circuit) | OTP (Over Temp) | OPP (Over Power) DC-DC Converters: 2x UBIQ QM3054M6 (30V, 61A @ 100°C, 4.8mOhm) & 2x UBIQ QN3107M6N (30V, 70A @ 100°C, 2.6mOhm) PWM Controllers: uPI SEMI uP3861P
Primary side: Half-Bridge & LLC Resonant Converter Secondary side: Synchronous Rectification & DC-DC converters Only info I found online was quite a few people saying to "avoid the RM750 as it's a "Tier 3" psu... Whatever that means... They are both Gold rated?? Electrolytics: 7x Elite (2-5,000h @ 105°C, EK), 1x Elite (4-10,000h @ 105°C, EY), 1x Elite (2,000h @ 105°C, PF), 2x Su'scon (2-5,000h @ 105°C, MF), 3x Su'scon (4-10,000h @ 105°C, HG) Polymers: Suncon, Elite, NICCompletely modular cables means you only connect the cables your system needs, and the wide range of included cables adds broad compatibility with modern graphics cards and motherboards. The Cybenetics organization measures efficiency and noise levels across the PSU’s entire operational range, using more than 1,450 different load combinations.
Aftermarket 980Ti>= Fury X>= Reference 980Ti> Fury> 980> 390X> 390>= 970 > 380X > 380>= 960> 950 >= 370 > 750Ti = 360The RM650x easily meets the ErP Lot 6 2013 directive's requirements. Fan RPM, Delta Temperature And Output Noise The new Intel specification requires better efficiency at 2%-10% load and new timings (T1 and T3 to support modern standby mode). This was not easy/cheap to achieve, so Corsair couldn't just replace the current RMx in the market with a new, more expensive version without tangible differences. So the capacitors and fan was "down graded" (though Hong Hua is a fantastic fan manufacturer) to allow this "new version" of the RM to meet an acceptable price point.
Great Deal 
New Comment